TAB Bonding Machine, Product: TM-300PR-MKIII

Home

English

Sitemap

	-

ACF Pre-attachment Machine

All Products

	ACF / HSC Bonding Machine

Pulse Heat Machine
TM-101P-MKIII

Pulse Heat Machine
TM-101PR-MKIII

	ACF Pre-attachment Machine

ACF Pre-attachment Machine
TM-90-MKIII

ACF Pre-attachment Machine
TM-90-MKIII-1

	Reflow (Hot Bar) Soldering Machine

Reflow (Hot Bar) Soldering Machine TM-111-MKIII

	Semi-Auto COG/COF Bonding Machine

Semi-Automatic
COG Pre-bond Machine TM-807C

COG Final Bond Machine TM-808P

	Pulse Heat TAB Rework Machine

TM-118P-TFT

	TAB Bonding Machine

TAB Bonding Machine
TM-300PR-MKIII

	Electronic Manufacturing Equipment

Spot Weld Machine TM-333

	Test & Measurement Equipment

Precision Pull Tester TM-78

LVDT Readout Controller TM-28S

1 Channel Load Cell Controller
TM-29S

Temperature Data Logger
TM-22

	Flex On Glass Bonding Machine

TM-300C-2H-MKIV

	FOG Automatic Bonding Machine

TM-388P

ACF Pre-Attachment Machine

For Product Enquiry

ACF PRE-ATTACHMENT MACHINE TM-90-MKIII-1

TM-90-MKIII-1 ACF Pre-attachment Machine is ideally suited for production needs in the attachment of Anisotropic Conductive Film (ACF) onto LCD, glass panel, flexible circuits, PCB and a wide variety of substrates. Constant heat utilized as the heating source to ensure consistency in the temperature across the heater block. Generally, ACF is pre-attached onto the substrates prior to bonding of TAB or Flex circuits. The automatic operation process comprises of ACF lamination, peeling and half-cut operation. This high performance ACF dispensing system has the ability to handle both single and double ACF protective layer. The integrated universal ACF collet is also compatible with a wide variety of ACF.

	Specifications Chart
	Print This Page
	Download Brochure [Size=671KB]
[ Note: It may take a few minutes for downloading, please wait. ]

TM-90-MKIII-1
ACF Pre-attachment Machine


Key Features & Benefits

	Integrated with high accuracy constant heat controller			High performance system that handles single or double ACF protective layer
	Half-cut mechanism			Universal ACF collets and guides applicable to a wide variety of ACF
	Semi-automatic operation in linear moving stage provides fast and safe loading and unloading of substrates			Leveling mechanism adjustment on press assembly
	Built-in vacuum			Manual mode for machine set-up
	20 programmable profiles can be stored electronically			LCD touch screen controller for easy programming and parameter data storage and recall
	User pre-set password


Applications

Dispensing of ACF onto PCB, LCD and Flex Circuits

Specifications Chart

Heating Method	Constant Heat
Power Requirement	220VAC +/-10%, 50/60 Hz, 0.75kVA
Operating Ambient	23ºC +/-5ºC, 40 to 100% humidity with no significant dust
Supply Pressure	Filtered Clean and Dry air, 5-7 kgf / cm²
Programmable Profiles	20
Work Table Size	120mm x 120mm
Work Area	Diameter 334mm
LCD Panel Size	100mm (L) x 90mm (W)
Dimensions	600mm (L) x 600mm (W) x 1420mm (H)
Weight	Est. 110kg
Constant Heating Specifications
Hold Temp	30ºC to 300ºC
Hold Period	0.1 to 25 seconds at 0.05 seconds accuracy
ACF Delay to Peel	0 to 5 seconds
ACF Tape Advance	2mm to 80mm at 0.1 interval
ACF Width	1.5mm to 8mm
ACF Type	Single/ Double Protective Layer
ACF Cutting Method	Half Cut
ACF Placement Accuracy	X= +/-0.1mm, Y= +/-0.1mm
Heater Block Specifications
Bonding Force	2.0kgf – 48kgf
Heater Block Size	5mm x 1.5mm (min) to 80mm x 8mm (max)
Thermocouple Type	K Type

Specifications are subjected to change without prior notice