Machine specifications
- Heating Method: Constant Heat Constant Heat
- Power: Requirement 220VAC +/-10%, 50/60 Hz, 1.5kVA
- Supply Pressure: Filtered Clean and Dry Air, 5 - 7kgf/cm2
- Hold Temp: 30°C ~ 250°C
- Hold Period: 0.1 to 25 seconds at 0.05 seconds accuracy
- ACF Delay to Peel: 0 to 5 seconds
- ACF Tape Advance: 2mm to 80mm at 0.1mm interval
- ACF Width: 1.0mm to 8mm
- ACF Type: 2 layer / Single Protective Layer
- ACF Cutting Method: Half Cut
- Work Area : Diameter 334mm
- LCD Panel Size : 100mm (L) x 90mm (W)
- Dimensions : 600mm (L) x 780mm (W) x 1350mm (H)
TM-90
ACF预贴合机非常适合将各向异性导电膜（ACF）贴合到LCD，玻璃面板，柔性电路，PCB和各种基板上的生产需求。恒定热量被用作加热源，以确保整个加热块的温度保持一致。